雷火电竞-中国电竞赛事及体育赛事平台

歡迎來到入門教程網！

C語言

當前位置：主頁 > 軟件編程 > C語言 >

C++ 遍歷二叉樹實例詳解

來源：本站原創|時間：2020-01-10|欄目：C語言|點擊： 次

C++ 遍歷二叉樹實例詳解

2叉數又叫紅黑樹，關于2叉數的遍歷問題，有很多，一般有三種常用遍歷方法：

(1)前序遍歷(2)中序遍歷(3)后續遍歷

       以下是經典示例：

#include "stdafx.h" 
 
#include<stdio.h> 
#include<malloc.h> 
#include <math.h > 
#define MaxSize 20 
 
typedef struct BiTNode 
{ 
 int data; 
 struct BiTNode *lchild, *rchild; 
}BiTNode,*BiTree; 
 
//建立二叉樹 
void CreateBiTree(BiTree *T) 
{ 
 char ch; 
 scanf("%c",&ch); 
 getchar(); 
 if(ch==' ') 
 { 
  printf("不產生子樹。\n"); 
  *T=NULL; 
 } 
 else 
 { 
  if(!(*T=(BiTNode *)malloc(sizeof(BiTNode)))) 
  { 
   printf("分配空間失敗"); 
   return; 
  }//生成一個新節點 
  (*T)->data = ch; 
  printf("產生左右子樹。\n"); 
  CreateBiTree(&(*T)->lchild);        
  CreateBiTree(&(*T)->rchild);        
 } 
} 
 
//遞歸前序遍歷 
void Preorder(BiTNode *T) 
{ 
 if(T) 
 { 
  printf("%c ",T->data); 
  Preorder(T->lchild);         
  Preorder(T->rchild);        
 } 
} 
 
//遞歸中序遍歷 
void Inorder(BiTNode *T) 
{ 
 if(T) 
 { 
  Inorder(T->lchild); 
  printf("%c ",T->data); 
  Inorder(T->rchild); 
 } 
} 
 
//遞歸后序遍歷 
void Postorder(BiTNode *T) 
{ 
 if(T) 
 { 
  Postorder(T->lchild); 
  Postorder(T->rchild); 
  printf("%c ",T->data); 
 } 
} 
 
//非遞歸前序遍歷 
void NPreorder(BiTNode *T) 
{ 
 BiTNode *stack[MaxSize],*p; 
 int top=-1; 
 if(T) 
 { 
  top++; 
  stack[top]=T;     //根節點進棧 
  while(top>-1)     //棧不為空時循環 
  { 
   p=stack[top];    //退棧并訪問該節點 
   top--; 
   printf("%c ",p->data); 
   if(p->rchild)    //右孩子進棧 
   { 
    top++; 
    stack[top]=p->rchild; 
   } 
   if(p->lchild)    //左孩子進棧 
   { 
    top++; 
    stack[top]=p->lchild; 
   } 
  }       
 } 
} 
 
//非遞歸中序遍歷 
void NInorder(BiTNode *T) 
{ 
 BiTNode *stack[MaxSize],*p; 
 int top=-1; 
 p=T; 
 while(p||top!=-1) 
 { 
  if(p) 
  { 
   top++; 
   stack[top]=p; 
   p=p->lchild; 
  }        //根節點進棧，遍歷左子樹 
  else       //根節點退棧，訪問根節點，遍歷右子樹 
  { 
   p=stack[top]; 
   top--; 
   printf("%c ",p->data); 
   p=p->rchild; 
  } 
 } 
} 
 
//非遞歸后序遍歷 
void NPostorder(BiTNode *T) 
{ 
 BiTNode *stack[MaxSize],*p; 
 int flag,top=-1; 
 do 
 { 
  while(T) 
  { 
   top++; 
   stack[top]=T; 
   T=T->lchild; 
  }        //所有左節點進棧 
  p=NULL;      //p總是指向當前節點的前一個已經訪問過的節點 
  flag=1;      //flag為1表示當前節點已經訪問過了 
  while(top!=-1 && flag) 
  { 
   T=stack[top]; 
   if(T->rchild==p)   //右子樹不存在或者已經被訪問過時 
   { 
    printf("%c ",T->data); 
    top--; 
    p=T;     //調整p指針 
   } 
   else 
   { 
    T=T->rchild; 
    flag=0;    //調整訪問標志 
   } 
  } 
 } while(top!=-1); 
} 
 
//層次遍歷二叉樹 
void Translever(BiTNode *T) 
{ 
 struct node 
 { 
  BiTNode *vec[MaxSize]; 
  int f,r;    //r為隊尾，f為隊頭 
 }queue; 
 BiTNode *p; 
 p=T; 
 queue.f=0; 
 queue.r=0; 
 if(T) 
  printf("%c ", p->data); 
 queue.vec[queue.r]=p; 
 queue.r=queue.r+1; 
 while(queue.f<queue.r) 
 { 
  p=queue.vec[queue.f]; 
  queue.f=queue.f+1; 
  if(p->lchild) 
  { 
   printf("%c ",p->lchild->data); 
   queue.vec[queue.r]=p->lchild; 
   queue.r=queue.r+1; 
  } 
  if(p->rchild) 
  { 
   printf("%c ",p->rchild->data); 
   queue.vec[queue.r]=p->rchild; 
   queue.r=queue.r+1; 
  } 
 } 
 printf("\n"); 
} 
 
//求二叉樹的深度 
int Depth(BiTNode *T) 
{ 
 int dep1,dep2; 
 if(T==NULL) 
  return(0); 
 else 
 { 
  dep1=Depth(T->lchild); 
  dep2=Depth(T->rchild); 
  if(dep1>dep2) 
   return(dep1+1); 
  else 
   return(dep2+1); 
 } 
} 
 
//輸出二叉樹 
void Disptree(BiTNode *T) 
{ 
 if(T) 
 { 
  printf("%c",T->data); 
  if(T->lchild || T->rchild) 
  { 
   printf("("); 
   Disptree(T->lchild); 
   if(T->rchild) 
    printf(","); 
   Disptree(T->rchild); 
   printf(")"); 
  } 
 } 
}

main.cpp

void main() 
{ 
 BiTree T=NULL; 
 char j; 
 int sign = 1; 
 
 printf("本程序可以進行建立二叉樹、遞歸與非遞歸先序、中序、后序遍歷二叉樹、層次遍歷二叉樹、輸出二叉樹的擴展序列的操作。\n"); 
 printf("請將二叉樹的先序序列輸入以建立二叉樹，葉子節點用空格代替。\n"); 
 printf("您必須一個一個地輸入字符。\n"); 
 while(sign) 
 { 
  printf("請選擇: \n"); 
  printf("0.生成二叉樹         1.求二叉樹的深度\n"); 
  printf("2.遞歸先序遍歷        3.非遞歸先序遍歷\n"); 
  printf("4.遞歸中序遍歷        5.非遞歸中序遍歷\n"); 
  printf("6.遞歸后序遍歷        7.非遞歸后序遍歷\n"); 
  printf("8.層次遍歷         9.輸出二叉樹的廣義表形式\n"); 
  printf("q.退出程序\n"); 
  scanf("%c",&j); 
  getchar(); 
  switch(j) 
  { 
  case '0': 
   printf("生成二叉樹:"); 
   CreateBiTree(&T); 
   printf("\n"); 
   printf("\n"); 
   break; 
  case '1': 
   if(T) 
   { 
    printf("此二叉樹的深度為:"); 
    printf("%d",Depth(T)); 
    printf("\n"); 
    printf("\n"); 
   } 
   else printf("二叉樹為空!\n"); 
   break; 
  case '2': 
   if(T) 
   { 
    printf("遞歸先序遍歷二叉樹:"); 
    Preorder(T); 
    printf("\n"); 
    printf("\n"); 
   } 
   else 
    printf("二叉樹為空!\n"); 
   break; 
  case '3': 
   if(T) 
   { 
    printf("非遞歸先序遍歷二叉樹:"); 
    NPreorder(T); 
    printf("\n"); 
    printf("\n"); 
   } 
   else 
    printf("二叉樹為空!\n"); 
   break; 
  case '4': 
   if(T) 
   { 
    printf("遞歸中序遍歷二叉樹:"); 
    Inorder(T); 
    printf("\n"); 
    printf("\n"); 
   } 
   else printf("二叉樹為空!\n"); 
   break; 
  case '5': 
   if(T) 
   { 
    printf("非遞歸中序遍歷二叉樹:"); 
    NInorder(T); 
    printf("\n"); 
    printf("\n"); 
   } 
   else printf("二叉樹為空!\n"); 
   break; 
  case '6': 
   if(T) 
   { 
    printf("遞歸后序遍歷二叉樹:"); 
    Postorder(T); 
    printf("\n"); 
    printf("\n"); 
   } 
   else printf("二叉樹為空!\n"); 
   break; 
  case '7': 
   if(T) 
   { 
    printf("非遞歸后序遍歷二叉樹:"); 
    NPostorder(T); 
    printf("\n"); 
    printf("\n"); 
   } 
   else printf("二叉樹為空!\n"); 
   break; 
  case '8': 
   if(T) 
   { 
    printf("層次遍歷二叉樹:"); 
    Translever(T); 
    printf("\n"); 
    printf("\n"); 
   } 
   else printf("二叉樹為空!\n"); 
   break; 
  case '9': 
   if(T) 
   { 
    printf("輸出二叉樹:"); 
    Disptree(T); 
    printf("\n"); 
    printf("\n"); 
   } 
   else printf("二叉樹為空!\n"); 
   break; 
  default: 
   sign=0; 
   printf("程序運行結束，按任意鍵退出!\n"); 
  } 
 } 
}

示例：

轉換成雙向鏈表

先序列：H      F       C       D      M     I        N
中序列：C       F       D      H      I        M     N
后序列：C       D      F       I        N      M     H  

#include <iostream> 
using namespace std; 
struct BSTreeNode{ 
 char m_val; 
 BSTreeNode *m_pLeft; 
 BSTreeNode *m_pRight; 
}; 
BSTreeNode *pHead;//鏈表顯示的頭結點 
BSTreeNode *pListIndex;//游標指針 
void showOrderLiust(BSTreeNode *pCurrent); 
void createBSTree(BSTreeNode *&pCurrent,char ch) 
{ 
 if (NULL == pCurrent) { 
 pCurrent = new BSTreeNode; 
 pCurrent->m_val = ch; 
 pCurrent->m_pLeft = NULL; 
 pCurrent->m_pRight = NULL; 
 }else { 
 if (pCurrent->m_val > ch) { 
 createBSTree(pCurrent->m_pLeft,ch); 
 }else if (pCurrent->m_val < ch) { 
 createBSTree(pCurrent->m_pRight,ch); 
 } 
 else 
 { 
 return; 
 } 
 } 
} 
//遍歷二叉樹/*先序遍歷*/ 
void PreOrderTraverse(BSTreeNode *pCurrent) 
{ 
 if (NULL == pCurrent) { 
 return; 
 } 
 
 if (NULL!=pCurrent) 
 { 
 //先遍歷根節點 
 cout<<pCurrent->m_val<<endl; 
 //在遍歷左節點 
 PreOrderTraverse(pCurrent->m_pLeft); 
 //在遍歷右節點 
 PreOrderTraverse(pCurrent->m_pRight); 
 } 
 
} 
//中序遍歷 
void InOrderTraverse(BSTreeNode *pCurrent) 
{ 
 if (NULL == pCurrent) { 
 return; 
 } 
 if (NULL != pCurrent->m_pLeft) { 
 InOrderTraverse(pCurrent->m_pLeft); 
 } 
 
 showOrderLiust(pCurrent); 
 //在遍歷右節點 
 if (NULL != pCurrent->m_pRight) { 
 InOrderTraverse(pCurrent->m_pRight); 
 } 
} 
//后序遍歷 
void EndOrderTraverse(BSTreeNode *pCurrent) 
{ 
 if (NULL == pCurrent) { 
 return; 
 } 
 if (NULL != pCurrent->m_pLeft) { 
 EndOrderTraverse(pCurrent->m_pLeft); 
 } 
 cout<<pCurrent->m_val<<endl; 
 //在遍歷右節點 
 if (NULL != pCurrent->m_pRight) { 
 EndOrderTraverse(pCurrent->m_pRight); 
 } 
} 
/*該二元查找樹轉換成一個排序的雙向鏈表。 
 要求不能創建任何新的結點，只調整指針的指向*/ 
void showOrderLiust(BSTreeNode *pCurrent) 
{ 
 pCurrent->m_pLeft = pListIndex; 
 if (NULL != pListIndex) { 
 pListIndex->m_pRight = pCurrent; 
 }else 
 { 
 pHead = pCurrent; 
 } 
 pListIndex = pCurrent; 
 cout<<pCurrent->m_val<<endl; 
} 
int main(int argc,char**argv) 
{ 
 BSTreeNode *pRoot = NULL; 
 pHead = NULL; 
 pListIndex = NULL; 
 createBSTree(pRoot,'H'); 
 createBSTree(pRoot,'F'); 
 createBSTree(pRoot,'C'); 
 createBSTree(pRoot,'D'); 
 createBSTree(pRoot,'M'); 
 createBSTree(pRoot,'I'); 
 createBSTree(pRoot,'N'); 
 PreOrderTraverse(pRoot); 
 InOrderTraverse(pRoot); 
 EndOrderTraverse(pRoot); 
 delete pRoot; 
 return 0; 
}

感謝閱讀，希望能幫助到大家，謝謝大家對本站的支持！

上一篇：c++冒泡排序詳解

欄    目：C語言

下一篇：Linux下C語言的幾道經典面試題小結(分享)

本文標題：C++ 遍歷二叉樹實例詳解

本文地址：http://www.jygsgssxh.com/a1/Cyuyan/1512.html

網頁制作CMS教程網絡編程軟件編程腳本語言數據庫服務器

如果侵犯了您的權利，請與我們聯系，我們將在24小時內進行處理、任何非本站因素導致的法律后果，本站均不負任何責任。

聯系QQ：835971066 | 郵箱：835971066#qq.com(#換成@)

Copyright © 2002-2020 腳本教程網 版權所有